Three Common Sewing Machine Problems

September 15, 2018 5:49 am Published by Leave your thoughts

Have you ever been in the middle of a sewing project, really focused, when suddenly something goes wrong with your sewing machine? Creative inspiration doesn’t want to wait to resolve bunched thread or broken needles. At Fenton Sew and Vac, your local shop for sewing machine repair in St. Louis, MO, we know how frustrating sewing machine problems can be and we want to help! We’ve put together a list of three common sewing machine problems and what you can do to resolve them.

Knotting or Breaking Thread

If your thread is continually knotting or breaking, there are a few things that may be wrong:

  • Threaded incorrectly: Knotting thread on the bottom side is usually caused by threading errors. The best way to check this is to completely unthread your sewing machine and rethread it.
  • Worn bobbin: Overtime, bobbins can wear out, which will cause your thread to break. Plastic bobbins, in particular, are prone to wear faster. If you notice abrasions on the edge of your bobbin, it’s time to replace it.
  • Poor quality thread: If you bought bargain thread, this may be causing the problem. Cheap, poor-quality thread often has excessive lint and loose fibers, which can cause the thread to knot up or even break.

Skipped Stitches

When your sewing machine starts skipping stitches, there are several things that may be the cause:

  • Bent needle: It’s possible you may have bent your needle without realizing it, which would cause your machine to skip stitches.
  • Forcing the fabric: The feed dog is designed to feed the fabric through the machine evenly and at the correct speed. If you try to force the fabric yourself, you can cause the machine to skip stitches.
  • Old needle: The most common issue is a problem with your sewing needle. Even if you don’t see anything wrong with the needle you are using, try replacing it and see if this resolves the issue.

Fabric not Feeding

If your fabric is not feeding through the machine properly or keeps getting stuck, these are a few solutions you can try.

  • Fabric not placed correctly: Be sure that your fabric is all the way under the needle before lowering the presser foot to run the fabric through.
  • Wrong setting: If your machine has a drop-feed setting, make sure that it has not been activated.
  • Presser foot: Make sure that your presser foot is down and that you’ve set it to the correct pressure for the fabric you want to work on.
  • Remove special plates: Check to make sure that your embroidery and/or darning plate aren’t covering the feed dogs.

Sewing machines are delicate machines that require special care. If you are having trouble with your machine, try one of these troubleshooting tips. If none of these tips help resolve your sewing machine issues, or if you have bigger problems or even need regular maintenance, call Fenton Sew and Vac. We’re your local experts for sewing machine repair in St. Louis, MO!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *

Fenton Sew and Vac