The Beginner’s Guide to Serging

August 1, 2018 3:38 pm Published by Leave your thoughts

If you’re about to have your first experience with a serger, or overlocker, you might be a bit intimidated. However, you’ll soon find that with a bit of guidance, a serger is actually an easy-to-use tool that will save you precious time. Basically, a serger it’s a sewing machine that cuts and finishes seam allowances while you continue to sew. This saves you time from having to tidy and clean your sleeves.

Are you looking to get some practice in using a serger in St. Louis, MO? Then Fenton Sew and Vac can help you. Not only do we carry high-quality sewing machines and vacuum cleaners, but we also offer excellent customer service and will help you understand how to get the most out of your equipment. Let’s take a look at the basics of serging:

  • Don’t skimp when it comes to thread: While you might be able to use lower-quality thread on some projects without sacrificing quality, that’s not the case when using a serger. It’s liable to break and require sacrificing several hours for rethreading. Invest in high-quality thread for these projects and reap the results.
  • Pick up how to re-thread: You may be used to knotting and pulling thread, but with a serger, you’re going to have to re-thread. When things break or go wrong, you’ll need to have mastery of this technique. Although it might not be as fast, learning this method ahead of time means you’ll avoid problems later.
  • Don’t forget to clean your serger: A serger that’s being blocked by lint isn’t going to work. This means you need to clean the machine every few hours. If you don’t, threads and needles will break and the tension will lessen. You’ll also need to do periodic cleaning of the serger’s belly, which can be done with the help of a brush and a can of compressed air.
  • Don’t sew over pins: You may be using your sewing machine with pins and leaving them in. This won’t work with a serger. Instead, pin on the left, keeping the pins far from the seam, or try not pinning at all, depending on what you’re sewing.
  • You may not need so many cones: Sometimes people will purchase several cones of each color thread. However, you don’t need a huge quantity of thread for most serging projects. In fact, you could probably get away with a single cone. Purchase cones in neutral colors as well (black, white, gray) for stitching that will not be visible in the final product.

Whether you need sewing classes, supplies or a new serger in St. Louis, MO, then Fenton Sew and Vac is your trusted choice. We are a family-owned and -operated vacuum and sewing machine company that’s been serving the region for years. We sell, service and repair a wide variety of sewing machines and vacuum cleaners. Our friendly and professional customer service has made us a leader in the region.

Beyond that, we also carry janitorial supplies, embroidery supplies and quilting and fabric products, and even hold sewing classes. everything you need can be found right at our shop. Our wide selection of name-brand vacuums and sewing machines is the best out there. Stop by or call today to learn more!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *

Fenton Sew and Vac