Fix These Common Sewing Machine Malfunctions

April 27, 2018 4:10 pm Published by Leave your thoughts

Working with a sewing machine can be a trying task, no matter if you’re a novice or an old pro. Skipped stitches, broken needles and thread bunching are all surefire ways to irk even the most experienced seamstress. Some machines seem to run without any issues, while others are seemingly always plagued with repeat problems. A small patch job can turn into a big nightmare if the machine doesn’t cooperate.

Try to stay calm before attempting to get to the root of the problem. Typically, most issues can be fixed by cleaning the machine to remove accumulated dust and lint before checking the bobbin, needle and thread. If that doesn’t work, take a look at the following tips addressing some of the most common problems. Knowing how to combat any minor sewing machine malfunctions will help you get back on track quickly and avoid extensive sewing machine repair in St. Louis, MO.

Uneven or skipped stitches

This can be attributed to two things. The most common cause is a broken, bent or damaged needle. This can easily be fixed by replacing the needle. Replace the needle after about every 16 hours of sewing to avoid having to deal with skipped stitches. It could also be caused by improper handling of the fabric during the sewing process. Making the fabric go through the machine by pulling from behind can lead to bad stitching and even break the machine. This force-feeding method works against the feed dogs, which are responsible for gripping the bottom of the fabric and moving it away from the needle after the stitches have been sewn. Working with the machine, instead of forcing it, should solve the problem.

Thread bunching under the fabric

Bunching thread can be a huge nuisance. The thread begins to snare under the fabric because there isn’t a sufficient amount of tension on the upper thread. Once this happens, raise the presser foot lifter and then rethread the machine. This will open the tension mechanism so it can properly receive the thread. Then, check that there is the perfect amount of tension by raising the take-up lever and needle to the highest possible position. If the problem persists, take the machine to a professional for sewing machine repair in St. Louis, MO.

Breaking needle

First things first—are you using the right needle? Switching to an appropriately sized needle could easily solve this problem. Use sizes nine or 11 for delicate and lightweight materials, such as silk or organza. Size 14 is best suited for medium fabrics like flannel and suede, while a 16 should only be used for denim and other heavy fabrics. Using a size nine on a pair of jeans is a surefire way to break the needle.

Still having issues? Then it’s time for sewing machine repair in St. Louis, MO. Fenton Sew and Vac will be able to determine the cause of the problem before making the necessary repairs. We service the top names in sewing machines. Stop by or call today to learn more!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *

Fenton Sew and Vac