New Embroidery Machine? Here’s What You Need to Know

January 3, 2018 3:24 am Published by Leave your thoughts

If you’re the proud owner of a new embroidery machine in St. Louis, MO, you’re probably ready to rip open the packaging, toss the instructions aside and get to using your new treasure. We’re here to say, “Slow down!” Before you start embroidering anything, it’s important to make sure you get to know your machine a little. There’s a lot more to owning an embroidery machine than simply plugging it in and running a pattern.

Do Your Reading

The first thing you need to do is consult the instructions at length. Make sure you read up on proper setup for your machine, and take careful note of all of the critical parts and components. Getting to know your machine on a part-by-part basis will help you get a better understanding of how it works and, when trouble arises, what the issue might be. You’ll want to spend time familiarizing yourself with any diagrams and assembly instructions as well.

Run a Few Practice Cycles

Before you dive into your next project, make sure you’re taking some time to get the hang of the machine. Each embroidery machine is different and requires a different level of finesse. You’ll want to get familiar with the display and alignments, as well as its tendencies and operation. Embroider a few scrap projects first before diving wholeheartedly into your meaningful project.

Get Familiar with Maintenance

An embroidery machine in St. Louis, MO is like any other machine—it’s going to need a fair bit of maintenance to remain functional. Consult the manual for maintenance for your machine, or pay close attention to these basic maintenance items:

  • Dust the thread rack and in between the tensioners routinely.
  • Remove and clean the bobbin plate, clearing out debris and loose thread.
  • Keep the tension discs, hook and positioning finger, throat plate, bobbin case and needles debris-free and smooth at all times.
  • Clear debris out of the motor and filters to prevent your machine from running hot.

There’s more maintenance than just the above, and it varies with each machine. It’s best to create a maintenance schedule or consult with a professional about the right routine maintenance schedule.

Know How to Troubleshoot

Troubleshooting your machine is something that will come with time; however, it’s also important to be cognizant about the types of troubles you’re seeing. Bonding with your embroidery machine can help you identify problems quicker, prevent them altogether and extend the life of your investment.

Take Care of It

All in all, it’s important to put as much time and effort into maintaining and caring for your embroidery machine in St. Louis, MO as it is to using it. These machines can last for decades if properly cared for, and they’ll perform admirably on any project if given the chance. Spending some quality time giving your machine everything it needs will allow you to keep producing beautifully-embroidered works of art for years to come.

No matter what brand of embroidery machine you have, the best thing you can do is to spend a little time getting to know it a little better!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *