Broken Sewing Machine? We’ll Take Care of You!

January 26, 2018 8:58 pm Published by Leave your thoughts

Whether you’re a seasoned seamstress or a beginner learning the craft, running into sewing machine trouble is inevitable. Maybe the needle is wonky, the tread isn’t tight when you sew or a part is squeaky—but the most frustrating thing is when your machine randomly stops working in the middle of your sewing project. While finding the source of the problem on your own can be a difficult task, it’s worth trying.

Here are three things you might want to check before seeking professional sewing machine repair in St. Louis, MO.

The needle

The star of the sewing show is one of the smallest parts of your machine—the needle. With your guidance, it’s the thing that feeds the thread in the bobbin to the fabric and makes the sewing or embroidery stitches you want. Because the needle is so small in comparison to other machine parts, it’s too easy to overlook its condition or neglect inspecting it for damage from time to time. But the needle should be one of the first things you check when you run into issues with your sewing machine.

Needles with the slightest bend, a burr or a broken tip can put a halt to your sewing project, maybe even ruin it. Another problem could be that the needle is not pushed all the way in, or has been inserted in the wrong direction. Try this fix first: simply remove the needle and see if it’s damaged and needs to be replaced, or make adjustments to its position in the machine.

The bobbin case

You have to move thread from a spool of thread to a bobbin before you can sew stitches with your sewing machine. Winding thread to a bobbin case is the first step, followed by threading the needle. But, as you may already know, you can run into issues with the bobbin case that can put a halt to your sewing project.

It could be that the thread is not moving or is pulling too tight. Try adjusting the tension or the placement of the bobbin case, and then test it out on a scrap of fabric. If the tension seems fine, the next thing to do is clean the bobbin area with a lint brush and oil it. Not cleaning and oiling your machine regularly could lead to costly issues and frequent disruptions of sewing projects.

The presser foot

Not all sewing machines have a presser foot. If your machine does have one, you may run into a problem when the part becomes loose—the fabric you are working with won’t squeeze tightly enough to hold together. So, what should you do about a presser foot lacking sufficient resistance? Check it for damage and tighten it a little.

While you may be able to fix minor issues at home, other types of sewing machine repair in St. Louis, MO require a professional’s touch. Luckily for you, Fenton Sew and Vac has sewing machine repair experts at the ready to assist you. Have a broken sewing machine on your hands? No problem—we’ll take care of you! Call or visit us today!

Categorised in:

This post was written by Writer

Leave a Reply

Your email address will not be published. Required fields are marked *

Fenton Sew and Vac